武漢理工大學材料科學與工程學院研究生導師：馮瑋

• 2026考研英語全程班 6班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 武漢理工大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

武漢理工大學材料科學與工程學院研究生導師馮瑋介紹如下：

一、姓名：馮瑋

二、基本情況

1、出生年月：1973.02    
2、學位：博士
3、職稱：副教授
4、工作院系：材料學院材料成型與加工系

三、教育經歷（從大學開始）：

1992年－1996年，原武漢汽車工業大學材料科學與工程學院塑性成型工藝與裝備專業，獲工學學士學位
1999年－2003年，武漢理工大學，材料科學與工程學院材料加工工程專業，獲工學碩士學位
2006年－2011年，武漢理工大學材料科學與工程學院材料加工工程專業，獲博士學位

四、工作經歷： 

1996年－2002年， 武漢理工大學，材料科學與工程學院，助教
2002年－2012年， 武漢理工大學，材料科學與工程學院，講師
2012年—至今，   武漢理工大學，材料科學與工程學院，副教授

五、研究領域（不多于3個）：

1.精密成形工藝與數值模擬技術
2.模具CAD/CAE/CAM與優化設計
3.高分子材料成型工藝與模具設計

六、科研項目（不多于5項）：

1. 螺旋圓柱齒輪溫精密成形機理與技術基礎研究 國家自然科學基金面上項目
2. 斜齒圓柱齒輪旋轉精沖成形機理及工藝方法研 國家自然科學基金面上項目
3.精密鍛軋成套新技術                      國家重大科技專項

七、代表性論文及著作（不多于10項）：

1. FENG Wei, Fu Youheng. High temperature deformation behavior and constitutive modeling for 20CrMnTiH steel.Materials and Design 2014, 57: 465-471
2. FENG Wei (馮瑋)，HUA Lin(華林), HAN Xing-hui(韓星會). Finite element analysis and simulation for cold precision forging of a helical gear，Journal of Central South University of Technology，19(12)，3369-3377，2012
3. Wei Feng , Lin Hua. Multi-objective optimisation of process parameters for the helical gear precision forging by using Taguchi method, Journal of Mechanical science and Technology, 2011, 25(6): 1519-1527
4. Wei Feng, Yunfeng Mei, Kang Yan, Tian Zou, Xinlei Zhang.Billet design optimization of helical gears precision forging based on response surface method and FEM simulation.Advanced Materials Research, 2011, 189-193: 4168-4172
5. Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Prediction of forming load for the helical gear precision forging by BP neural network，Advanced Materials Research, 2013, 823:170-174
6.馮瑋，徐富家. 20CrMnTiH鋼熱壓縮微觀組織演變及動態再結晶模型.塑性工程學報，2014, 21(3):78-84
7 馮 瑋，曹繼昌，吳舒婷，李揚帆.應用 BP 神經網絡預測精鍛斜齒輪損傷因子. 武漢理工大學學報，2014, 36(3):328-331
8. 馮瑋.圓柱螺旋齒輪溫精密成形的三維熱力耦合溫度場有限元分析. 熱加工工藝，2012, 41(15):93-95, 98.
9. 馮瑋.圓柱螺旋齒輪冷精鍛成形的三維剛塑性有限元模擬. 熱加工工藝, 2010, 39(11):91-93, 96.
10. 模具CAD/CAM基礎(國家十一五規劃教材)．武漢：武漢理工大學出版社，2009

八、聯系方式：

1、Tel： 15327376755
2、E-mail：fengwei@whut.edu.cn
3、工作地址（實驗室）：材料學院大樓408室

 
 
 
 
1.Name: Feng Wei
2.Brief introduction:
1)Date of birth: 02/1973
2)Degree:     Ph.D
3)Title:       Associate Professor
4)Working department: Manufacturing and Processing of Material，School of Material science and Engineering,
3.Education experience(after entering university):
2008.3- 2011.6  Doctor of Material Processing Engineering,
School of Material Science and Engineering,
Wuhan University of Technology
1999.9- 2003.6  Master of Material Processing Engineering,
School of Material science and Engineering,
Wuhan University of Technology
1992.9-1996.7  Bachelor of Material Processing and Control Engineering, School of Materials Science and Engineering, Wuhan University of Technology
4.Working experience:
2012.9- present  Associate Professor of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology
2012.8- 2002.9  Lecturer of Material Processing Engineering,
School of Material Science and Engineering,
Wuhan University of Technology
1996.7-2002.8  Assistant of Material Processing Engineering,
School of Material Science and Engineering,
Wuhan University of Technology
5.Research field(no more than 3):
1) Precision forming technology and numerical simulation
2) Mold&Die CAD&CAM&CAE Technology
3) Plastic Injection Molding
6.Research project(no more than 5):
1) State science and technology support program: Research on Deformation Mechanism and Technology in Warm Precision Forging Helical Gear
2) State science and technology support program： Research on forming mechanism and process design method of rotating fine-blanking technology for helical gear
3) The Major State science and technology support program：The Whole New Technology of Precision Forging
7.Representative papers and works(no more than 10):
[1] Feng Wei, Fu Youheng. High temperature deformation behavior and constitutive modeling for 20CrMnTiH steel.Materials and Design 2014, 57: 465-471
[2] Feng Wei，HUA Lin, HAN Xing-hui. Finite element analysis and simulation for cold precision forging of a helical gear，Journal of Central South University of Technology，19(12)，3369-3377，2012
[3] Feng Wei , Lin Hua. Multi-objective optimisation of process parameters for the helical gear precision forging by using Taguchi method, Journal of Mechanical science and Technology, 2011, 25(6): 1519-1527
[4] Feng Wei, Yunfeng Mei, Kang Yan, Tian Zou, Xinlei Zhang.Billet design optimization of helical gears precision forging based on response surface method and FEM simulation.Advanced Materials Research, 2011, 189-193: 4168-4172
[5] Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Prediction of forming load for the helical gear precision forging by BP neural network，Advanced Materials Research, 2013, 823:170-174
[6] Feng Wei, Xu fujia. Microstructure evolution and dynamic recrystallization model of  20CrMnTiH steel during hot compression. Journal of Plastic Engineering，2014, 21(3):78-84
[7] Feng Wei, Cao Jichang,Wu Shuting, LI Yangfan.Application of BP Neural Network in Damage Factor Prediction for Precision Forging Helical Gears. Journal of WUT( Information & Management Engineering),2014, 36(3):328-331
[8] Feng Wei.Three Dimensional Coupled Thermo-Mechanical Finite Element Analysis on Temperature Field for Warm Precision Forming of Helical Gear. Hot Working Technology，2012, 41(15):93-95, 98.
[9] Feng Wei.3D Rigid Plastic Finite Element Simulation of Precision Cold Forging of Helical Gear. Hot Working Technology2010, 39(11):91-93, 96.
[10] Mold CAD/CAM Foundation (the 11th Five-Year Programmed Textbooks)．
Wuhan：Wuhan University of Technology Press，2009
8.Contact information:
1) Tel: 15327376755
2) E-mail: fengwei@whut.edu.cn
3) Location of lab: Room 408 in School of Material Science and Engineering office building