[1] Cheng Chen, Chunhui Shen, Gengjin Kong,Shanjun Gao, High temperature proton exchange membranes prepared from Epoxycyclohexylethyltrimethoxysilane and Amino trimethylene phosphonic acid as anhydrous proton conductors, Materials Chemistry and Physics, 2013,140(1): 24-30

[2] Gengjin Kong, Zhihan Guo,Chunhui Shen,Cheng Chen, Preparation conditions of inorganic-organic hybrid membranes synthesized from Epoxycyclohexylethyltrimethoxysilane and 1-hydroxyethane-1, 1-diphosphonic acid, Journal of Sol-Gel Science and Technology, 2013,66(1): 84-90

[3] Chunhui Shen,Zhihan Guo, Cheng Chen, Preparation of inorganic-organic hybrid proton exchange membrane with chemically bound hydroxyethane diphosphonic acid, Journal of Applied Polymer Science,2012,126(3): 954-959

[4] Chunhui Shen, Wei Li, Ling Zhang, Chao Wan, Shanjun Gao,Synthesis of cyanoethyl konjac glucomannan and its liquid crystalline behavior in an ionic liquid, Journal of Polymer Research, 2012,19(1): 9758-9766

[5] Shen chunhui, Pan Mu, Wu Qiong,Yuan Runzhang, Performance of an aluminate cement /graphite conductive composite bipolar plate, Journal of Power Sources, 2006,159(2):1078-1083

[6] Chunhui Shen, Leon L. Shaw, L. C. Zhang, Edwin L. Thomas, Porous Gadolinia-Doped Ceria with Adjustable Pore Sizes using PI-b-PEO Copolymer as the Structure-Directing Agent, Journal of Sol-Gel Science and Technology, 2012,63(1): 72-84

[7] Chunhui Shen, Leon L. Shaw, FTIR Analysis of the Hydrolysis Rate in the Sol-Gel Formation of Gadolinia-Doped Ceria with Acetylacetonate Precursors， Journal of Sol-Gel Science and Technology,2010,53(3):571-577

[8] Shen chunhui, PAN mu, YUAN runzhang，Sodium Silicate/Graphite conductive composite bipolar plates for proton exchange membrane fuel cell，Journal of Power Sources, 2006,162(1):460-463

[9] Shen chunhui, PAN mu, YUAN runzhang, The effect of particle size gradation of conductive fillers on the conductivity and the flexural strength of composite bipolar plate, International Journal of Hydrogen Energy, 2008,33(3): 1035-1039

[10] Shen chunhui, PAN mu, HUA zhoufa, YUAN runzhang, Aluminate cement /Graphite conductive composite bipolar plate for proton exchange membrane fuel cells, Journal of power sources, 2007,166(2):419-423

[11] Leon L. Shaw, Chunhui Shen, Edwin L. Thomas, Synthesis of Gadolinia-Doped Ceria Gels and Powders from acetylacetonate precursors, Journal of Sol-Gel Science and Technology, 2010, 53(1):1-11

[12] Shen Chunhui, Li Denian, Zhang Ling, Wan Chao,Gao Shanjun,Dissolution of konjac glucomannan with room temperature ionic liquids,Journal of Wuhan Universtity of Technology, (MaterialsScience) , 2011,26(4): 703-709

授權專利

[1]沈春暉,一種氧化釓摻雜氧化鈰的復合氧化物固溶體凝膠的制備方法,中國發明專利,專利號：ZL 200910062001.8

[2]沈春暉,一種用于中溫質子交換膜中的膦酸基烷氧基硅烷的制備方法,中國發明專利,專利號：ZL201010128612.0

[3]沈春暉,一種有機聚硅氧烷膦酸基中溫質子交換膜及其制備方法,中國發明專利,專利號：ZL201010128634.7

[4]沈春暉,高結晶的有序介孔氧化釓摻雜氧化鈰固溶體的制備方法,中國發明專利,專利號：ZL201110042024.X

[5]沈春暉,一種用于質子交換膜中的膦酸基烷氧基硅烷的合成方法，申請號： 201110305960.5

[6]沈春暉,一種用于高溫質子交換膜中的含氮多膦酸烷氧基硅烷的制備方法，申請號：201210148297.7

[7]沈春暉,一種化學鍵合羥基乙叉二膦酸中溫有機聚硅氧烷膦酸基質子交換膜及其制備方法，申請號：201210292699.4

[8]沈春暉,一種調控水泥基雙極板的孔尺寸和孔隙率的方法，申請號： 201210422708.7

[9]沈春暉,一種低粘度堿溶性光敏預聚物及其制備方法，申請號： 201110254290.9

[10]沈春暉,一種非溶劑型耐高溫可剝離保護油墨及其制備方法，申請號：201210276647.8

八、聯系方式：

電話：027-87875286

E-mail：shenchunhui@whut.edu.cn

工作地址(實驗室)：復材樓3樓

1.Name: Chunhui Shen

2.Brief introduction:

1)Date of birth: Feb. 18, 1970

2)Degree: Ph.D

3)Title:Professor

4)Working department:Polymer Composite Materials & Engineering

3.Education experience(after entering university):

Ph.D(2000.9~ 2006.12)

Major: New Energy Materials

Institute:State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology

Thesis Title:Study on Preparation and Performance of cement/conductive filler mould pressing composite bipolar plate

Advisor:Prof.Run-Zhang Yuan and Prof. Mu Pan

MS(1994.9~1997.7)

Major:Polymer Materials Science and Engineering

Institute:Department of Polymer Materials Science and Engineering,

Qingdao University of science and Technology

Thesis Title: Synthesis of Liquid Hydroxyl-Terminated Polybutadiene

Advisor:Prof. De-He Li

BS(1990.9~1994.7)

Major:Polymer Materials Science and Engineering

Institute:Department of Polymer Materials Science and Engineering,

Qingdao University of science and Technology

4.Working experience:

PROFESSOR(2012.10~present)

Teaching and researching at College of Material Science and Engineering, Wuhan University of Technology in China VISITING SCIENTIST(2008.11~2009.11)

At the group of professor Leon.L.Shaw,Institute of Material Science, the Department of Chemical, Materials and Biomolecular Engineering, University of ConnecticutASSOCIATE PROFESSOR (2006.11~2012.10)

Teaching and researching at College of Material Science and Engineering, Wuhan University of Technology in China

Teaching courses: polymer chemistry and physics, polymer rheology. LECTURER (1999.11~2006.11)

Teaching and researching at College of Material Science and Engineering, Wuhan University of Technology in China

Teaching courses: polymer chemistry and physics, polymer rheology, polymer architecture material, polymer blends, polymer material processing,functional polymer etc.

5.Research field(no more than 3):

Materials of Proton Exchange Membrane Fuel Cell (PEMFC) and Solid Oxide Fuel Cell (SOFC)

6.Research project(no more than 5):

1) Study on the high temperature and low humidity proton exchange membrane based on phosphonic acid functionalized poly(organosiloxane), 2011-2013

2) Preparation and characterization of high temperature proton exchange membrane with chemically bound amino polyphosphonic acid based on construction of continuous hydrogen bond network, 2013-2016

7.Representative papers and works(no more than 10):

[5] Shen chunhui, Pan Mu, Wu Qiong,Yuan Runzhang, Performance of an aluminate cement /graphite conductive composite bipolar plate, Journal of Power Sources, 2006,159(2):1078-1083

[8] Shen chunhui, PAN mu, YUAN runzhang，Sodium Silicate/Graphite conductive composite bipolar plates for proton exchange membrane fuel cell，Journal of Power Sources, 2006,162(1):460-463

8.Contact information:

1) Tel:

2) E-mail:shenchunhui@whut.edu.cn

3) Location of lab: Composite Materials Building 301